Power Antenna Wiring. Web this japanese antenna is designed to use what is basically an electric window switch and therefore comes with the wires going straight to the motor with no. Blue is switched from the radio.
power antenna wiring Third Generation FBody Message Boards from www.thirdgen.org
Just because your wiring harness. After watching this tutorial you'll be well informed enough. This is what allows the radio to retract the antenna when it isn't being used.
That Will Loosen The Rubber.
This is what allows the radio to retract the antenna when it isn't being used. Web most aftermarket replacement power antennas seem to have three wires, which are red, green and black. A) radios with switched antenna wire:
Connect Blue Wire From Antenna To The Switched.
Web here this diagram electric for power anten with 2 wires or 3 wires as the riviera. You need to hook the blue wire from your antenna to one of the radio switched sources, rather than the acc switched source. Antenna wiring for first time antenna installations:
Web Yes, These Two Wires Should Be Connected Together.
If you do have a power antenna, then yes you do connect the blue/white wire from the pioneer. This wire provides power to the antenna, which is necessary for the antenna to function. Tilt the bottom of the antenna away from the fender and pull the unit down and out.
Before Reading A Schematic, Get Familiar And Understand All Of The Symbols.
In a 240, if you have an antenna. Web a power antenna usually has 3 wires. When the radio turns on it gives power to the.
Web Besides Mounting A New Antenna, You Will Also Need To Know How To Wire The New Power Antenna Up.
Unbolt the power antenna and pull it free. For radios with a power antenna wire, connect the green wire from the antenna to the power antenna wire from the radio (usually blue), then. After watching this tutorial you'll be well informed enough.
